1TB Hard Drive

R1,299.00

Or split into 4x interest-free payments Learn more

Description:

SkyHawk 1TB Hard drive are optimised for DVRs and NVRs, surveillance drives are tuned for 24×7 workloads. Equipped with enhanced ImagePerfect firmware, SkyHawk helps to minimise dropped frames and downtime with a workload rating 3x that of a desktop drive. With the Skyhawk 1TB Hard drive, see more and store more

 

Features:
  • Best-Fit Applications
  • Network video recorders (NVR)
  •  Embedded surveillance DVRs (SDVR)
  •  Hybrid surveillance DVRs
  •  Surveillance DVRs

 

Active mode

During the read/write and seek operations the drive is in Active mode.

Idle mode

Buffer remains enabled, and the drive accepts all commands and returns to Active mode any time disk access is necessary.

Standby mode

The drive enters Standby mode when the host sends a Standby Immediate command. If the host has set the standby timer, the drive can also enter Standby mode automatically after the drive has been inactive for a specifiable length of time. The standby timer delay is established using a Standby or Idle command. In Standby mode, the drive buffer is enabled, the heads are parked and the spindle is at rest. The drive accepts all commands and returns to Active mode any time disk access is necessary.

Sleep mode

The drive enters Sleep mode after receiving a Sleep command from the host. In Sleep mode, the drive buffer is disabled, the heads are parked and the spindle is at rest. The drive leaves Sleep mode after it receives a Hard Reset or Soft Reset from the host. After receiving a reset, the drive exits Sleep mode and enters Standby mode with all current translation parameters intact.

Idle and standby timers

Each time the drive performs an Active function (read, write or seek), the standby timer is reinitialized and begins counting down from its specified delay times to zero. If the standby timer reaches zero before any drive activity is required, the drive makes a transition to Standby mode. In both Idle and Standby mode, the drive accepts all commands and returns to Active mode when disk access is necessary.