Centurion D6 Smart Gate Motor


Technical Data D6-SMART
Input voltage (1) 90V – 240V AC +/-10% @ 50Hz
Current consumption (Mains) 200mA
Battery charger current output 1.3A
Maximum number of operations per day 150
Duty cycle – Mains present (2, 3) 50%
Motor voltage 24V DC
Motor power supply (5) Battery-driven (Standard Capacity – 2x12V)
Current consumption (motor at rated load) 13A
Input / Output sink currents (Max accessory current draw)
I/O 1-4 100mA (12/24V)
I/O 5 and 6 3A (12/24V) 10sec Pulse
Motor push force – starting 30kgf
Motor push force – rated 17kgf
Gate mass – maximum 600Kg
Gate length – maximum 100m
Gate speed (varies with load) (4) 35m/min @ 17kgf
Manual Override Lockable with key release
Operations in standby with 2 x 7Ah (28W) battery
Half day (5, 6) 209 (Power Saving)/ 102 (Normal)
Full day (5, 6) 183 (Power Saving)/ 79 (Normal)
Collision Sensing Electronic
Operating temperature range -15°C to +50°C
On-board receiver type Code-hopping multichannel receiver with selective add and delete
Receiver code storage capacity (7) 1500 Remotes
Receiver frequency 433.92MHz
Degree of protection IP55
Mass of unit packed (with standard kit, but excl. rack and battery) 9.1kg
Packaging dimensions (with standard kit, but excl. rack and battery) 325mm wide x 244mm deep x 445mm high

1. Can operate off a solar supply, consult your local dealer for assistance
2. Based on 25°C ambient temperature and unit not in direct sunlight
3. Based on a motor push force of less than 50% of rated (Starting and Running forces)
4. Gate opening and closing speeds can be configured to run slower depending
on the requirements of individual installations
5. Can increase battery capacity for longer standby times
6. Based on 4m gate, excluding all accessories
7. Multiple buttons per remote can be used

Or split into 4x interest-free payments Learn more